Blind spot monitor with car camera parking reversing assist system
Model : BS-1000
FEATURE:
To let the driver can see the blind area during moving to the intersection of the lane or the way out of the parking lot. It helps keep from hitting an unseen car,motorcycle or other moving object.
Two video input for Rear & Front View Camera. The driver can see the blind area during car moving backward or forward..
Easily install to any kinds of vehicle.
Three display modes – Full view only/Left rear + Right Rear or Left front + Right front/Full view + Left rear & Right rear or Left front & Right Front.
CONTENT:
BVS-1000 Car Box x 1
Power Cable (30cm) x 1
Mode Control Cable (Override switch type, 100cm) x 1
Camera (15cm) x 1
Camera Cable (3.5m) X 1
SPECIFICATION:
1.Main Box:
VIDEO
Camera Video Input
2 Channel CVBS,
NTSC / PAL
Video Output System
1 Channel CVBS,
NTSC / PAL
GENERAL
Camera Input
Connector
3-pin, Pitch 2.5
Video Output Connector(RCA)
1.0V Vp-p, 75 Ohm
Mode Control
Connector
2-pin, Pitch 2.5
Power Input
Connector
6-pin, Pitch 2.5
Power Input Voltage
DC 9-36V
Power Consumption
1.32W(under DC 12V)
Working Temperature
-30°C to +70°C
Storage Temperature
-40°C to +150°C
2.Camera:
No.
Item
Description
1
Sensor
1/3 inch CMOS Image Sensor
2
Effective Pixels
756X504
3
TV System
NTSC/PAL
4
Video Output
1.0V Vp-p 75Ohm load
5
Resolution
480 TV Lines
6
FOV
176°
7
Minimum illumination
0.1 Lux
8
Power input
DC 3.3V
9
Power Consumption
306.5 [mW]@ Dynamic
251.8 [uW]@ Standby
10
Water Proof
IP67
11
Operating Temperature
-40 ~ 105°C @ AT
-30 ~ 80°C@C
Pilock Corp. ADD: 5F, No.176, Jian 1st Rd., Zhonghe Dist., New Taipei City 23511, Taiwan  E-Mail: email@pilock.com.tw. Tel: +886-2-82268578  Fax: +886-2-82268577
